Automotive Insulated UV Reflective Coating PSG1900-IL
INTERIOR & EXTERIOR INSULATING 100% ORGANIC PAINT PCG1900-XX
The VerdaShield 1900 is a ultra high solids 100% organic bio-based interior and exterior finish. It is a single component, high solids coating that contains Insul-Aggregate, for use in moderate to severe environments. It has a 97% reflectivity rate. It is also anti-microbial and anti-viral, utilizing the pH level of the limestone pigments to combat the growth of bacteria and viral organisms .
It is specifically designed for application on primed and cleaned substrates, including steel, galvanized metal, plastic, fiberglass, drywall, masonry and many other surfaces. When applied as directed, it will provide the owner with an insulating value equal to that of R6 insulation, and incrementally higher values, when applied in two coats.
The VerdaShield System complies with USDA FSIS regulatory sanitation performance standards for food establishment facilities. This coating is impervious to moisture and easily cleaned and sanitized.
VerdaShield 1900 is 100% bio-degradable, and come in a variety of sheens..
| PERFORMANCE CHARACTERISTICS |
|---|
|
SYSTEM TESTED Topcoat: Organic Industrial Coating PENCIL HARDNESS METHOD: ASTM D3363 RESULT: B (7 days), 2H (30 days) CONICAL FLEXIBILITY METHOD: ASTM D522 RESULT: >32% CYCLIC PROHESION Rating 1-10, 10=best METHOD: ASTM D5894, 500 hours RESULT: 10 ASTM D714 for blistering RESULT: 10 ASTM D1654 for corrosion IMPACT RESISTANCE (direct) METHOD: ASTM D2794 RESULT: 110 in. lbs. TABER ABRASION METHOD: ASTM D4060 CS-17 wheel, 500 g. load, 500 cycles RESULT: 125 mg loss GLOSS METHOD: ASTM D4587 RESULT: 50% |
| PHYSICAL PROPERTIES | |
|---|---|
| 1900 DTM Coating | |
| Resin Type | Bio-Based |
| Pigment | Limestone |
| Solvents | Water |
| Weight (Per Gallon) | 12.6 lbs. |
| Weight (Per Liter) | |
| Solids (By Weight) | 79% |
| Solids (By Volume) | 65% |
| Volatile Organic Compounds | 0.0 lbs./gal. |
| Mixing Ratio | None |
| Recommended Dry Film Thickness (DFT) Per Coat | 4.0 Mils |
| Wet Film to Achieve DFT (unthinned material) | 6.0 Mils |
| Theoretical Coverage at 5 mil DFT | 208 sq.ft./gal. |
| Practical Coverage at Recommended DFT (assumes 15% material loss) | 177 sq.ft./gal. |
| Induction Period | None required |
| Pot Life (Gallon) | None |
| Pot Life (5 Gallons) | None |
| Dry Times at 50% Relative Humidity — Tack-free | 0.5 Hr. at 80°F |
| Dry Times — Handle | 1 Hr. at 80°F |
| Dry Times — Recoat | 1 Hr. at 80°F |
| Dry Heat Resistance | 300°F (149°C), Color may shift above 150°F (66°C) |
| Maximum Immersion Temperature | NA |
| Shelf Life | 3 Years |
| Safety Information | For additional information, see SDS |