The Problem With Water Based Petroleum Paints

11 Problems Verda Shield Solves

Most paints on the market are made from petroleum derivatives. This creates direct consequences for people’s health, for the comfort of buildings, and for the environment. Here’s how we solve it.

🌡️
PROBLEM 01

High Indoor and Outdoor Temperatures

Water based petroleum based paints do not insulate: they absorb and transmit heat, raising the indoor temperature of buildings and energy consumption for climate control.

Verda Shield Solution: NASA-endorsed military-grade thermal insulation combined with solar reflection of up to 96–98%, which reduces the exterior temperature by up to 25% and slows heat transfer to the interior.
🧴
PROBLEM 02

Generation of Microplastics

Paints with petroleum-derived plastic resins release microplastics during application, wear, and degradation, contaminating air, water, and soil.

Verda Shield Solution: mineral-based formula, free of petrochemical-origin plastic resins, which also encapsulates and permanently retains microplastics already present in the environment.
☠️
PROBLEM 03

Toxicity of VOCs

The volatile organic compounds (VOCs) present in water based petroleum based paints are released into the air for years, affecting indoor air quality and respiratory health.

Verda Shield Solution: zero-VOC line whose molecular graphene mesh completely stops outgassing, preventing volatile compounds from being released into the environment.
🦠
PROBLEM 04

Mold Growth on Walls

Moisture trapped under water based petroleum based paints promotes the proliferation of mold and fungi, deteriorating walls and affecting the health of occupants.

Verda Shield Solution: highly alkaline artisanal lime base that creates a natural antibacterial surface, hindering the development of mold and fungi on the wall.
⚠️
PROBLEM 05

Proven High Toxicity

Numerous studies have proven the toxicity of components used in water based petroleum based paints, with short- and long-term health impacts.

Verda Shield Solution: mineral-based formula with no flammable or toxic components: coated spaces can be reoccupied in just hours, compared to the weeks of ventilation required by conventional paints.
🌫️
PROBLEM 06

No CO2 Absorption

Water based petroleum based paints are inert to ambient CO2: they contribute nothing to reducing emissions or to air quality.

Verda Shield Solution: our Bio-Coatings absorb CO2 from the environment during their curing process (24 days), unlike conventional paints, which are inert to CO2.
🧫
PROBLEM 07

Mold From Trapped Wall Moisture

Independent research (NIOSH, EPA/Lawrence Berkeley National Laboratory, WHO) links roughly 47% of U.S. buildings to dampness or mold, with 45+ million structures carrying unhealthy fungal contamination and up to 75% greater risk of respiratory symptoms in affected buildings. The root cause: water based petroleum based paints trap water vapor migrating through the wall (the “pocket effect”), keeping the substrate persistently moist.

Verda Shield Solution: our breathable lime + graphene system lets water vapor escape instead of trapping it, and raises surface pH to 12–13 — inhospitable to mold — while adding graphene reinforcement for mechanical strength, without sacrificing breathability.

Read the full technical report (PDF) →

🧱
PROBLEM 08

Unhealthy Concrete and Drywall

Conventional Portland-cement concrete stays saturated for months, feeding mold in basements and slabs, while standard gypsum drywall’s paper facing is itself an organic food source for mold. Lab tests cited in building-biology literature found that a single 1 sq. in. air leak in a 4×8 ft. sheet of drywall can deposit up to 30 quarts of moisture into a wall cavity in a single heating season.

Verda Shield Solution: our sealing primers block capillary moisture migration into concrete and eliminate the exposed organic paper substrate on drywall, in a zero-VOC, zero-microplastic formulation that removes an entire category of chemical exposure conventional sealants don’t address.

Read the full technical report (PDF) →

📡
PROBLEM 09

Radio-Frequency Signal Contamination

Cell towers, radio antennas, TV repeaters, and dense wireless networks expose homes and offices to constant high- and low-frequency electromagnetic radiation, while also leaving indoor networks vulnerable to outside signal interception.

Verda Shield Solution: BIO-SHIELD-PLUS 1 combined with BIO-SEC-A1 creates a two-layer system that blocks high- and low-frequency electromagnetic radiation and interception risk, finished with a living, breathable interior coating.
🏭
PROBLEM 10

Overheating of Storage Silos

Metal storage silos exposed to direct sun absorb and retain heat across their exterior shell, raising the temperature of stored materials and driving up cooling and energy costs for industrial facilities.

Verda Shield Solution: Bio-VEP-B5 primer combined with BIO-SAC-I-S5 (1+4) insulated epoxy coating reflects solar radiation and adds military-grade insulation, reducing surface temperature on exposed metal tanks and silos.
🚚
PROBLEM 11

Overheating in Delivery and Cargo Vehicles Without Air Conditioning

Delivery vans, box trucks, and cargo trailers without air conditioning absorb intense heat through their metal roofs and walls, raising cabin and cargo-box temperatures and putting drivers, goods, and temperature-sensitive cargo at risk.

Verda Shield Solution: A three-part insulated system — Bio-VEP-B5 + Bio-SAC-A5 on exterior roofs, Bio-VEP-B5 + BIO-SEC-B5 on interior walls, and Bio-SAC-A5-I on cargo box floors — reflects solar radiation and insulates the entire box, keeping cabins and cargo cooler without A/C.